Compatible Spare Parts for the Rangemaster Quadrant Contemporary

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Quadrant-ContemporaryMV-CRClockwise (to open) red39mm Mini Valve£12.99 Tuesday
Quadrant-ContemporaryMV-ABAnticlockwise (to open) blue39mm Mini Valve£12.99 Tuesday
Quadrant-ContemporaryMV-PPair (1 x red, 1 x blue)39mm Mini Valve£25.98 Tuesday
Quadrant-ContemporaryMV-PTPair with fitting tool39mm Mini Valve£35.97 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK35-SSingleSpout O Ring Kit £6.99 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
SS81-SSingleM4 stainess grub screw for Handle£3.00 Tuesday
SK01-SSingleSet of Allan Keys£1.99 Tuesday
ST03-SSingleBox spanner for Mini Valve£9.99 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
SR24C-SSingleAerator chrome£6.00 Tuesday


RANGEMASTER QUADRANT TAP SPARES
Tap Magician compatible spares / parts to repair the Rangemaster Quadrant Contemporary kitchen mixer tap.


Watch our tutorial how to guide to take you through step by step.
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3308R / SP3308.
Cartridge has 28 teeth on spline. Hot and cold valve replacements available.

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout.
Our SK35 spout repair kit is compatible with the 3473R.

Replacement aerator available

How to remove your cartridge
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body.
The old valve may have two flats instead of a hex nut. Our tool has two ends.
One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How To remove the handle:
Loosen grub screw at the rear of handle using a 2mm allen key (SK01-S).
Then pull the handle horizontally away from the tap.
Using a spanner unscrew the valve and remove it from the body.

How to replace the spout o-rings:
Loosen grub screw on the rear of body using a 2.5mm allen key (SK01-S).
Then pull the spout vertically away from the body. When replacing the spout rubber seals you should apply a layer of silicon grease on these (SL05-S).

You can find the Quadrant Contemporary tap diagram / instructions below.

Frequently asked questions about your Carron Phoenix Ardenza tap.

How to identify my Rangemaster tap? How to repair my leaking Rangemaster Quadrant Contemporary tap?
Spares available for Rangemaster Quadrant Contemporary.

Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.