Compatible Spare Parts for the CDA TT41

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TT41TA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£9.99 Tuesday
TT41TA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£9.99 Tuesday
TT41TA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£19.98 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK22-SSingleSpout O ring repair kit£5.00 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
SK59C-SSingleChrome Handle Pair£27.00 Tuesday
SK59CB-SSingleSatin/Brushed Handle Pair£36.00 Tuesday
SK01-SSingleSet of Allan Keys£1.99 Tuesday
ST17-SSingle17mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday


Tap Magician compatible spares / parts to repair the CDA TT41 Monobloc Dual Lever Chrome Kitchen Sink Mixer Tap.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3561R, hot and cold valve replacements available.
Compatible with TT41CH & TT41NI models.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When replacing the spout seals we recommend to lubricate with a silicone grease (SL05-S).
The original O'ring kit is known by 1239R.

Replacement handles are available but will need to be replaced as a pair as they are slightly different to the original.
Handle reviver kit code SK59C (chrome) and SK59CB (Brushed).

How to remove tap handle replace cartridge?
Remove the indice / screw cover / dust cap using a small flat bladed screwdriver or fingernail.
Unscrew the crosshead screw and pull the handle away from the tap body.
Holding the tap body unscrew the valve using a 17mm ring spanner (ST17-S,STBOX-S,ST0TTK-S) or adjustable wrench.

How to remove / replace the spout o-rings?
Whilst holding body unscrew the spout locking collar.
Pull the spout vertically away from the body.
Remove the old o-rings using a small screwdriver or similar.



Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.