Compatible Spare Parts for the Clearwater Tutti

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TuttiTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£9.99 Today
TuttiTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£9.99 Today
TuttiTA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£19.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR63C-SSingleAerator chrome£6.60 Today
SR63CB-SSingleAerator brushed chrome£6.99 Today
SK17-SSingleSpout O' Ring Repair Kit£5.60 Today
SB27-SSingle27mm adaptor bush£7.94 Today
SL05-SSingleLubricant£3.50 Today
ST17-SSingle17mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today
SK01-SSingleSet of Allan Keys£1.99 Today


CLEARWATER TUTTI TAP SPARES
Tap Magician replacement cartridge for the older models of the Clearwater Tutti kitchen mixer tap.


Please note that later versions of this tap have been made by a different manufacturer.

We recommend you check and compare your own parts against ours.
Below Image of the older cartridge option which we cannot supply.


If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original cartridge known by code SP3561R / 3561R. Hot and cold valve replacements available.

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve.
If the valve is stuck inside the bush you can try to separate them.
If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.
Original adaptor bush known by SP3868 coding.

If your tap is leaking around the base of the spout (the neck) you need to replace the o rings inside the spout.
Our O'rings are compatible with original spare parts known by SP2300.

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 / SP1263 / 1263R.
Your original part may have Neoperl stamped around the edge.

Frequently asked questions about your Clearwater Tutti tap.

How to remove the handle on the Clearwater Tutti?

Before replacing the cartridge, you will need to turn the water off.
Use Allen key to undo grub screw beneath handle.
Pull lever off. You may need to use some force.
Once the handle is removed you will need to unscrew shroud anticlockwise.

How do I replace the tap cartridge?
First make sure you turn the water off.
Use 17mm or adjustable spanner to undo cartridge (it will unscrew anticlockwise).
Fit new cartridge (clockwise) and replace the tap handle.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

How to identify my Clearwater tap? How to repair my leaking Clearwater Tutti tap? Spares available for Clearwater Tutti.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.