Compatible Spare Parts for the Franke Eiger

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
EigerTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£9.99 Tuesday
EigerTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£9.99 Tuesday
EigerTA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£19.98 Tuesday
EigerTA-PWBPair of Cartridges + Set of Bushes1/2" Cartridge x 28 x 54mm£29.00 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR63C-SSingleAerator chrome£6.60 Tuesday
SR63CB-SSingleAerator brushed chrome£6.99 Tuesday
SS81-SSingleM4 stainess grub screw for Handle£3.00 Tuesday
SK17-SSingleSpout O' Ring Repair Kit£5.60 Tuesday
SB27-SSingle27mm adaptor bush£7.94 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
ST17-SSingle17mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
SS06-SSingleM5 x 6mm round head grub screw£3.49 Tuesday


Replacement cartridges and spare parts to repair the Franke Eiger kitchen mixer taps chrome and silk steel. 115.0049.989,115.0049.990

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

The Franke cartridge has 28 teeth on the spline, and may be known by the following spare part references;
S1022, SP3561, 3561R, 1427R, 133.0438.152C, 133.0438.154H, 133.0069.364, 133.0069.365, 133.0194.088, 133.0194.089.


Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic valves and Spout O Rings.


When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve.
If the valve is stuck inside the bush you can try to separate them.
If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.
The Brass bush is known by code 3868R 133.0312.538.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by SP2300, 2300R.

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 /1263R. Your original part may have Neoperl stamped around the edge.

How to remove the Franke Eiger handle/Lever:
Use 2mm allen key to undo screw holding handle on. Pull lever off.
Unscrew cover / shroud (anticlockwise). You can then use a 17mm or adjustable spanner to remove the cartridge.

How to remove the spout and replace the orings:
Use 2.5mm Allen key to undo screw at the back of the spout Pull spout up and out of tap body and replace o rings.
Apply suitable silicone grease to the new o rings.(replacementspout retaining screw SS06 (known by 133.0438.157).

You can find the Eiger tap diagram / instructions below.

Franke tap gland, Franke tap repair, tap fix, how can I stop my tap from dripping? Tap Insert, Tap Washer.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.