Compatible Spare Parts for the Franke Filterflow Kubus

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
FilterKubTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£10.99 Tuesday
FilterKubTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£10.99 Tuesday
FilterKubTA-3Triflow pack(1 x red, 2 x blue)1/2" Cartridge x 28 x 54mm£32.97 Tuesday
FilterKubTA-AH06CCold Valve and Chrome HANDLE1/2" Cartridge x 28 x 54mm£26.99 Tuesday
FilterKubTA-CH06CHot Valve and Chrome HANDLE1/2" Cartridge x 28 x 54mm£26.99 Tuesday
FilterKubTA-AH06CBCold Valve and Brushed Steel HANDLE1/2" Cartridge x 28 x 54mm£26.99 Tuesday
FilterKubTA-CH06CBHot Valve and Brushed Steel HANDLE1/2" Cartridge x 28 x 54mm£26.99 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR02OL-SSingleAerator chrome F22x1 Filter £11.50 Tuesday
SH02C-SSingleChrome Finish Shroud£11.49 Tuesday
SH02CB-SSingleBrushed Finish Shroud£11.49 Tuesday
SS81-SSingleM4 stainess grub screw for Handle£3.00 Tuesday
SK19-SSingleO Ring Tap Repair Kit£5.60 Tuesday
SB27-SSingle27mm adaptor bush£7.94 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
SK01-SSingleSet of Allan Keys£1.99 Tuesday


Tap Magician replacement spare parts to fit the Franke FILTERFLOW Kubus kitchen mixer tap 120.0180.354.
br> Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

This cartridge is NOT compatible with the TRIFLOW Kubus, the TRIFLOW model was discontunued in 2011. please find the cartridge for the Triflow version here

The Franke cartridge may be known by the following spare part references; s1022 , SP3561, 3561R, 1427R, 133.0438.152, 133.0438.154, 133.0069.364, 133.0069.365 , 133.0194.088, 133.0194.089

We now have tap handles available (Supplied with handle screw). However these are only available to purchase together with our valve as they will not fit on your original cartridges. Please note they do not have H or C engraved on the handle (the handle is plain) Original handle / lever code 3011R

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.
The Brass bush is known by code 3868R

If your Kubus tap is leaking from the base of the spout where the spout meets the tap body (the neck) then you will need to replace the O Rings / washers inside the spout. The O'ring kit is known by original part number 1425R.

If you need a new aerator(end nozzle/anti-splasher) this is part SR02OL and is compatible with 3620R only currently available in chrome

You can find the Filterflow Kubus tap diagram/instructions below.
Franke Filterflow Kubus Frequently asked questions

How to I remove the Franke Filterflow Kubus tap handle?
Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle.
You can pull the lever forwards to access the screw at the back if you need more space.
How do I know if need the adaptor bush?
Until you remove the cartridge from the tap you will not know if you need this part.
This is because sometimes the bush gets corroded to the tap and remains in the tap body, and other times it comes out corroded to the tap cartridge.

Can I remove the adaptor bush from the old cartridge?
Yes you can but it can be very hard to remove due to corrosion. You can try using very hot water, followed by cold water over it, to help break the corrosion seal. The bush unscrews from the cartridge anticlockwise. You will likely ed to use some grips or put it in a vice to remove it. If you cannot separate it you will need to replace the bush.

How do I remove the spout and replace the o'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place. pull spout up and out of the tap body. You can watch our How to video above.

What size spanner do I need to remove the Franke Filterflow Kubus tap handle?
You will need a 17mm or an adjustable spanner



Cartridge known by flow valve, 1/4 turn valve, Tap Insert, Tap Barrel, Tap Washer. tap gland. How do I stop my filter tap dripping?

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.