Compatible Spare Parts for the Lamona Lugano TAP3590

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Lugano-TAP3590T1-CRClockwise (to open) red1/2" x 28 x 47mm£14.00 Today
Lugano-TAP3590T1-ABAnticlockwise (to open) blue1/2" x 28 x 47mm£14.00 Today
Lugano-TAP3590T1-PPair (1 x red, 1 x blue)1/2" x 28 x 47mm£28.00 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SV47-ABAnticlockwise (to open) blue1/2" Valve with Handle adaptor£17.50 Today
SV47-CRClockwise (to open) red1/2" Valve with Handle adaptor£17.50 Today
SV47-PPair (1 x red, 1 x blue)1/2" Valve with Handle adaptor£35.00 Today
SK22-SSingleO' Ring Tap Repair Kit£5.00 Today
SS04-SSingleM5 handle grub screw£3.00 Today
SK01-SSingleSet of Allan Keys£1.99 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
ST17-SSingle17mm spanner£6.50 Today


Tap Magician compatible spares / parts to repair the Howdens Lamona Lugano TAP3590 kitchen mono tap.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 3982R hot and cold valve replacements available.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. You need to replace all parts from the O'Ring seal kit The original Oring kit is known by 1239R.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

If you require a new spline adaptor for inside the handle you can purchase our cartridge together with the SA03.

You can find the Lugano tap diagram/instructions below.

How To remove the handle: Use a 2.5mm Allen key to remove grub screw on the underside of the handle. Pull the handle vertically away from the tap body.

How to replace the spout o-rings: Whilst holding body unscrew the spout locking collar. Then pull the spout vertically away from the body.



Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.