LEISURE AQUAFORM KITCHEN TAP SPARES

Replacement spare parts for the Leisure Aquanomic AquaForm Monobloc Twin Lever Kitchen Sink Tap
Compatible with models LETAQFORM2CM / RANTAQFORMCM / TAQFORMMB / TAQFORMBRZ.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

If your Leisure AquaForm kitchen tap is dripping out of the spout then you need to replace the cartridges.
The AquaForm cartridge has 28 teeth on spline. Hot and cold valve replacements available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your AquaForm tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.

Replacement aerator flow straighter available in Chrome (SR63C) and Brush Chrome (SR63CB).

LEISURE AQUAFORM FAQ'S

How do I remove the AquaForm twin lever handle?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, by using a 2.5mm allen key.
Step 2. Pull the handle away from the tap body.
Step 3. You’ll then need a crosshead screwdriver to remove the screw holding the white plastic sleeve in place.
Step 4. With the handle adaptor sleeve removed use our ST03-S cartridge removal tool to unscrew the cartridge.
Step 5. Replace the cartridge and reverse the steps to refit the handle.

Replacement handle levers available is Chrome (SK59C) and Brushed Chrome (SK59CB).
Please note our levers are plain (no H or C markings) and supplied with a handle retaining screw.

How do I remove the spout?
Unscrew locking collar. Pull spout up and away from tap body.

My leisure AquaForm tap is dripping. How can I repair and fix my leaking tap?
We have technical support available for all of your questions.