STREAME BY ABODE BROLLE KITCHEN TAP SPARES

Tap Magician fully compatible spares for the Brolle 871JM, ACT3025, ACT3058, ACT3027, ACT3026.
Our cartridge is compatible with ASCDV0003 / 4276R /3561R.

If your tap is leaking/dripping out of the spout then it is time to replace the cartridges.
The Streame Bolle tap cartridge has 28 splines. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1425R SP1425.

If you require a new lever handles then you can purchase our SK59C SK59CB These differ to the originals so must be replaced as a set (please note our handles do not have H or C on them).
Handles supplied with retaining screw. If you need a screw separately for the handle this is our SS81-S.

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

Frequently asked questions

How to I remove the tap handle and replace the cartridge?
1. Use 2mm allen key to undo handle.
2. The grub screw is located on the underside of the handle.
You can pull the lever forwards to access the screw at the back if you need more space.
3. Unscrew shroud. (anti-clockwise.)
4. Use Our box spanner (STBOX-S) to remove cartridge which is recessed.
How do I remove the spout and replace the o'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place. pull spout up and out of the tap body. You can watch our How to video above.
What size spanner do I need to remove the tap cartridge?
You will need a 17mm or an adjustable spanner