LEISURE AQUACLEAR KITCHEN TAP SPARES

Replacement spare parts for the Leisure Aquaclear TAQCLEARCM.
Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

If your Leisure kitchen tap is dripping out of the spout then you need to replace the cartridges.
Original cartridge code known by 3561R, 1427R

The Aquaclear cartridge has 20 teeth on spline. Hot valve available.
You will require clockwise open for the hot side.

Your cartridge may remove from the tap with the adaptor bush. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush. Replacement bush available as SB27.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.

Replacement aerator flow straighter available in Chrome (SR63C) and Brush Chrome (SR63CB).
If your spout needs replacing you can purchase a replacement with aerator and o'rings.

We now stock replacement UK Manufacturered carbon water filter cartridges. These are WRAS Approved. The cartridges are for chlorine, taste and odour reduction.

LEISURE AQUACLEAR FAQ'S

How do I remove the Aquaclear twin lever handle?
Before replacing the cartridge you will need to turn the water off
Step 1. Remove the handle retaining screw, by using a allen key
Step 2. Pull the handle away from the tap body
Step 3. Unscrew shroud from the tap body anticlockwise

Step 4. Use 17mm or adjustable spanner to undo cartridge anticlockwise
Step 5. Screw in the new cartridge clockwise
Step 6. Tighten the cartridge enough to seal, but avoid over-tightening

How do I remove the spout?
Unscrew locking collar. Pull spout up and away from tap body.

My leisure Aquaclear tap is dripping. How can I repair and fix my leaking tap?
We have technical support available for all of your questions.