Compatible Spare Parts for the Franke Filterflow_Kubus

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Filterflow_KubusTA-CRClockwise (to open) red1/2" x 28 x 54mm£11.93 Tomorrow
Filterflow_KubusTA-ABAnticlockwise (to open) blue1/2" x 28 x 54mm£11.93 Tomorrow
Filterflow_KubusTA-AH06CCold Valve and Chrome HANDLE1/2" x 28 x 54mm£27.90 Tomorrow
Filterflow_KubusTA-CH06CHot Valve and Chrome HANDLE1/2" x 28 x 54mm£27.90 Tomorrow
Filterflow_KubusTA-AH06CBCold Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£27.90 Tomorrow
Filterflow_KubusTA-CH06CBHot Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£27.90 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SH02C-SSingleOlympus Chrome Finish Shroud£11.49 Tomorrow
SH02CB-SSingleOlympus Satin Finish Shroud£11.49 Tomorrow
SS81-SSingleM4 stainess grub screw for Handle£3.00 Tomorrow
SK19-SSingleO Ring Tap Repair Kit£6.00 Tomorrow
SB27-SSingle27mm adaptor bush£7.94 Tomorrow
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Tomorrow


Tap Magician replacement spare parts to fit the Franke FILTERFLOW Kubus kitchen mixer taps.
br> This cartridge is NOT compatible with the TRIFLOW Kubus, the TRIFLOW model was discontunued in 2011. please find the cartridge for the Triflow version here

The Franke cartridge may be known by the following spare part references; s1022 , SP3561, 3561R, 1427R, 133.0438.152, 133.0438.154, 133.0069.364, 133.0069.365 , 133.0194.088, 133.0194.089

We now have tap handles available (Supplied with handle screw). However these are only available to purchase together with our valve as they will not fit on your original cartridges. Please note they do not have H or C engraved on the handle (the handle is plain) Original handle / lever code 3011R

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.
The Brass bush is known by code 3868R

If your Kubus tap is leaking from the base of the spout where the spout meets the tap body (the neck) then you will need to replace the O Rings / washers inside the spout. The O'ring kit is known by original part number 1425R.

You can find the Filterflow Kubus tap diagram/instructions below.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.