Compatible Spare Parts for the San Marco Venice

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
VeniceSV-SSingleBSP 1/2" x 24spline Compression valve£9.99 Today
VeniceSV-2Two singlesBSP 1/2" x 24spline Compression valve£19.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK22-SSingleO' Ring Tap Repair Kit£5.00 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
ST17-SSingle17mm spanner£6.50 Today


SAN MARCO VENICE TAP SPARES
Replacement spares to fit the San Marco Venice tap with crosshead handles.


For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the gland.
Original spare part codes known by 1290R SP1290.

Cartridge has 24 teeth on spline. Valve opens anticlockwise.

If your tap is leaking around the neck (where the spout connects to the body) then you need new o rings.
Original o'ring code known by 1239R.

How to remove handle and change valve:
Unscrew the end cap / indice from end of handle.
Unscrew screw using a crosshead or slotted screwdriver and remove the handle.
Undo valve cover / shroud anticlockwise.

How to remove the spout and replace the o'rings:
Unscrew the spout locking collar and pull the spout vertically away from the body.
Remove and replace with our SK22-S o'ring kit.
Remember to grease the O-rings thoroughly with silicone grease.

You can find the Veince tap diagram / instructions below.
This may be called a traditional screw down / full turn / rubber washer valve / headwork.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.