Tap Magician compatible spares / parts to repair the Franke Lina Spout Mono Mixer Kitchen Tap 115.0627.532.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by SP3308, 3308R, SP3794 3794R, 133.0358.055, 133.0358.053, 133.0150.220, 133.0150.219, hot and cold valves available

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout meets and joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a suitable silicone grease. The original O'ring kit is known by 3668R, 1260R. Our O'Ring Kit includes the Correct sized Allen key to remove the spout.

If you require a new antisplasher /aerator this is our part SR63C (available in Chrome). Original codes known by 133.0068.762 SP1263 / 1263R your original part may have Neoperl stamped around the edge.

How To remove the handle: There will be a grub screw on the underside of the handle. Once removed the handle will then pull off away from the tap body.

How to remove your cartridge - Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

You can find the Lina tap / instruction diagram below.


Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings on the Franke Ascona tap model.