Compatible Spare Parts for the San Marco PC1

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
PC1QA-ABAnticlockwise (to open) blue1/2" Cartridge 20 x 51mm £9.99 Tuesday
PC1QA-CRClockwise (to open) red1/2" Cartridge 20 x 51mm £9.99 Tuesday
PC1QA-PPair (1 x red, 1 x blue)1/2" Cartridge 20 x 51mm £19.98 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SRBLK-SSingleMale Thread 24mm Black£4.40 Tuesday
SK22-SSingleSpout O ring repair kit£5.00 Tuesday
SB28-SSingle28mm to 1/2" BSP£9.99 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
SL50-SSingleRegin Grease 50ml£9.99 Tuesday
ST17-SSingle17mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
SI01-SSingleTap indices set£5.50 Tuesday


Tap Magician compatible spares / parts to repair the San Marco PC1 Kitchen mixer monobloc tap.

Watch our how to video for further guidance on removing your tap handles and replacing tap cartridges.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 1212R.

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

For guidance / instructions of how to replace a tap valve step by step please click here

Your valve may come out stuck inside the brass bush (original code 3409R)./ If you cannot separate or the tap is leaking at the handle joint you will need to purchase together with the new bush.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1239R SP1239.

If you need a replacement aerator this is our SRBLK-S, which is compatible with 133.0068.760 / 1256R

How To remove the PC1 handle: First remove screw cover (indice) on the end of the handle. Use appropriate screwdriver to remove screw holding handle in place. The handle will then pull off. Replacement indices available.

How to remove the PC1 spout and change o rings: Unscrew locking collar at base of spout. Pull spout up and out of tap body. Grease the new o rings before fitting back in to spout.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.