Compatible Spare Parts for the Clearwater Pulsar

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
PulsarT1-CRClockwise (to open) red1/2" Cartridge 28 x 47mm£15.00 Monday
PulsarT1-ABAnticlockwise (to open) blue1/2" Cartridge 28 x 47mm£15.00 Monday
PulsarT1-PPair (1 x red, 1 x blue)1/2" Cartridge 28 x 47mm£30.00 Monday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SA03-SSingleHandle Adaptor & Screw £3.50 Monday
SK01-SSingleSet of Allan Keys£1.99 Monday
ST17-SSingle17mm spanner£6.50 Monday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Monday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Monday
SL05-SSingleLubricant£3.50 Monday

CLEARWATER PULSAR TAP SPARES
Tap Magician compatible spares parts to repair the Clearwater Pulsar Twin Lever Monobloc Mixer Kitchen Tap.


For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3982R, hot and cold valve replacements available.

Your tap handle may utilise a plastic handle adaptor / tap head carrier.
Sometimes this can wear or break. We can supply a replacement if required (Our part SA03-S).

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.

How to remove my Clearwater Pulsar tap handle / head?
Use a Allen key to remove grub screw on the underside of the handle. Pull the handle horizontally away from the tap.

Watch our video below for guidance / how to change your quarter turn ceramic valves.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.