Compatible Spare Parts for the Franke Olympus

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
OlympusTA-CRClockwise (to open) red1/2" x 28 x 54mm£9.99 Monday
OlympusTA-ABAnticlockwise (to open) blue1/2" x 28 x 54mm£9.99 Monday
OlympusTA-PPair (1 x red, 1 x blue)1/2" x 28 x 54mm£19.98 Monday
OlympusTA-PWBPAIR WITH SB27 BUSH1/2" x 28 x 54mm£34.97 Monday
OlympusTA-AH06CCold Valve and Chrome HANDLE1/2" x 28 x 54mm£19.99 Monday
OlympusTA-CH06CHot Valve and Chrome HANDLE1/2" x 28 x 54mm£19.99 Monday
OlympusTA-AH06CBCold Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£19.99 Monday
OlympusTA-CH06CBHot Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£19.99 Monday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK19-SSingleO Ring Tap Repair Kit£6.00 Monday
SB27-SSingle27mm adaptor bush£7.94 Monday
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Monday


Franke Olympus Spare Parts to repair your leaking or dripping tap.
Compatible spares for models,
Olympus S,
Olympus Side Spray,
Filterflow (The Filterflow takes two anticlockwise and one clockwise)
*This ceramic cartridge is NOT compatible with the Olympus Triflow and Trispray which were discontinued in 2011. For those taps you need our Q254LC model.

When you remove your old Cartridge / Insert from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.

The Franke cartridge may be known by the following spare part references; s1022 , SP3561, 3561R, 1427R, 133.0438.152, 133.0438.154, 133.0069.364, 133.0069.365 , 133.0194.088, 133.0194.089
The Brass bush is known by code 3868R

If your Olympus tap is leaking from the base of the spout where the spout meets the tap body (the neck) then you will need to replace the O Rings / washers inside the spout. The O'ring kit is known by original part number 1425R SP1425. Please note the Screw supplied will not fit the "G" model (identifiable by the red and blue colour markers on the levers) or Pre 2007 models so be sure to keep your old screw.

We now have tap handles available (Supplied with handle screw). However these are only available to purchase together with our valve as they will not fit on your original cartridges. Please note they do not have H or C engraved on the handle (the handle is plain) Original handle / lever code 3011R



Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings


Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.