SAN MARCO DECK MIXER TAP SPARES
Compatible tap reviver kit for the San Marco Deck Mixer tap.
We do not sell the valves for the Deck Mixer Kitchen tap but have available a compatible quarter turn tap reviver.
You will receive 2x compression valves with screws plus a set of new handles.
For guidance / instructions of how to replace a tap valve step by step please
click here
If your tap is dripping or leaking out of the spout then it is time to replace / change the valves.
If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R / ASOR0002.
If you need a replacement aerator this is our SRBLK-S, which is compatible with 133.0068.760 / 1256R
How to remove handle and change valve:
Before replacing the cartridge, you will need to turn the water off.
Lever out the dust cap using a small precision screwdriver.
Unscrew the crosshead screw, then pull the handle away from the tap body.
Then remove the valve by using an adjustable spanner.
How to remove the spout and replace the o'rings:
Unscrew the spout locking collar and pull the spout vertically away from the body.
Remove and replace with our SK22-S o'ring kit. Remember to grease the O-rings thoroughly with silicone grease.
You can find the Lamona Deck tap diagram / instructions below.