IDEAL STANDARD SILVER DAUL CONTROL WALL BATH FILLER TAP SPARES

Tap Magician compatible replacement cartridges to fit the Ideal Standard Silver Dual Control wall bath filler E0071AA.
These are long stem Cartridges which are 79mm tall with 18 teeth on the spline.

Our premium quality fully compatible cartridges will enable you to easily repair your leaking or dripping Ideal Standard bath tap.
Hot and cold cartridges available.

For guidance / instructions of how to replace a tap valve step by step please click here

If your bath wall tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
You will need clockwise to open for the hot side and anticlockwise to open for the cold side.

How to remove the handle lever on the Silver dual control bath filler tap?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, using a 2mm Allen key to undo grub screw at the base of the lever (SK01-S).
Step 2. Once this screw is loosened, you can pull the lever off.
Step 3. Remove the decorative plate and shroud.
Step 4. Use socket set to unscrew cartridge from tap body.

If you require a replacement screw, you can purchase our SS81 model, which is fully compatible with screw E91830267.

See the Ideal Standard Silver Wall instructions diagram below.

Watch our How to video for more general guidance on removing tap handles and replacing tap cartridges.

Spares for Silver wall bath tap. How to repair my silver bath tap. Ideal standard spares.