WREN TAP DELPHI SPARES
Tap Magician replacement ceramic cartridges for Wren Delphi Pull Out Chrome Kitchen Mixer Monobloc tap TA.WRN.041.

For guidance / instructions of how to replace a tap valve step by step please click here

Original cartridge coding PAINI ASME A112.1.8.1 UPC.

Your cartridge will have a smooth rounded brass spline adaptor fitted (see photo below).
If this is damaged or you cannot remove it you can purchase our SA60-S replacement handle adaptor.



Hot and cold replacement cartridges available.
You will need our Anticlockwise for the cold side and Clockwise for the hot side.

This model uses a 2.5mm allen key to remove the grub screw from the handle.
If you need a new handle screw this is our SS04-S and SK01-S for allen key set.

If your tap is leaking from where the spout joins the tap body then you need new o rings which is our SK32-S.

Chrome tap base plinth available SF048-S.

We have a compatible spray head available please note this is not identical to the original but is fully compatible

If you require new handles you can purchase our tap reviver kit (2 new cartirdges, handle adaptors and handles) these handles are different to the originals so must be replaced together as a kit.

HOW TO REMOVE THE WREN DELPHI TAP HANDLE?
Remove chrome screw cover at the back of the handle.
You will then need a 2.5mm allen key to undo the grub screw.
Once this has been removed the handle will pull off.

Watch our how to video on removing tap handles and replacing tap cartridges.

View the diagram of the Delphi tap here.