Compatible Spare Parts for the Bristan 1901 Kitchen Easyfit

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
1901-Kitchen-EasyfitSV-PPair (1 x red, 1 x blue)1/2" x 82mm Chrome Stem£27.50 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR24C-SSingleAerator chrome£6.00 Today
SWSS-SSingleSerrated Washer£0.99 Today
ST17-SSingle17mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today


Replacement Spares for Bristan 1901 easyfit sink mixer chrome and gold N SNK EF C/ N SNK EF G.
Please note our replacement cartridges are 5mm longer than the originals and therefore must be replaced together so that the handle positions match.

Watch our how to video for guidance on removing tap handles and replacing tap cartridges.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by Bristan Spare part code 310V10146CP (original is 77mm ours is 82mm height).

Replacement flow straightener aerator available in chrome (SR24C-S).
Known by original Bristan coding ANT 06215.

How to remove the crosshead handle on the Bristan 1901 kitchen taps?
Remove hot cold indice to reveal handle retaining screw. Undo the screw and pull the handle off.
Unscrew the shroud anticlockwise and use adjustable spanner to remove cartridge.

How to remove the spout and replace the spout seals
Use flat bladed screwdriver to undo screw at the back of the spout. Pull spout up and away from tap body. Remove old o rings. Apply silicone grease to the new o rings before fitting back into the spout.

See instruction diagram to remove handle below.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.