CARRON PHOENIX CARNEGGIE TAP SPARES
Tap Magician Compatible spares to fit the Carron Phoenix Carnegie Single Lever Kitchen Tap.

If your tap is dripping or leaking out of the spout then it is time to replace the valve.
Original spare part known by code 1202R. 35mm single lever cartridge.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 3761R / 133.0277.067.

If you require a new handle retaining screw this is our SS04-S.
We have a suitable set of Allen keys (SK01-S) available to remove the handle and spout.

To replace the antisplasher / aerator you will need our part SR63C/CB (available in Chrome or brushed). Original codes known by 133.0068.791 / 1485R. Your original part may have Neoperl stamped around the edge.

How To remove the handle and replace valve:
First you will need to unscrew the handle retaining screw by using a 2.5mm allen key.
You can then remove the handle and then unscrew the cartridge cover by unscrewing it anticlockwise.
Once removed use an adjustable spanner to remove the cartridge locking ring.

How To remove the spout and replace o'rings:
You will first need to unscrew the spout retaining screw by using a 2.5mm allen key.
You can then lift the spout up and replace the o rings at the base with the new parts (SK19-S).

You can find the Carneggie tap diagram/instructions below.
For guidance / instructions of how to replace a tap valve step by step please click here.

Frequently asked questions about your Carron Phoenix Carneggie tap.

How to identify my Carron Phoenix tap? How to repair my leaking Carron Phoenix Carneggie tap? Spares available for Carron Phoenix Carneggie.
Any further questions contact our experienced technical team.

Carneggie