FRANKE FUJI TAP SPARES

Tap Magician Compatible Replacement Ceramic tap cartridge to fit the Franke Fuji and Fuji Pull out Lever single lever tap.
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

If your tap is dripping or leaking out of the spout then it is time to replace / change the flow on off cartridge.
Original flow cartridge known by code 1202R / SP1202 / 133.0069.360.

If your tap is leaking at the base of the spout you need replacement o rings (SK19). O-Ring cartridge known by code 1425R
When replacing the orings you must apply silicone grease (SL05) to the new o rings.

If you require a new handle retaining screw this is our SS04-S.
SK01 is a set of Allen keys available to remove the handle and spout.

How do I remove the Franke Fuji tap handle?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, using appropriate size Allen key (SK01-S).
Step 2. Pull the handle away from the tap body.
Step 3. Unscrew decorative shroud from the tap body anticlockwise.
Step 4. Use an adjustable spanner to undo the cartridge locking nut.
Step 5. Remove old cartridge from the tap body.
Step 6. Fit your new cartridge in place and reverse the steps to refit the handle.

How do I remove the Franke Fuji spout?
Step 1. Use 2.5mm Allen key to undo spout retaining screw.
Step 2. Pull spout up and out of tap body.