LAMONA CUBIC TAP SPARES
Tap Magician Compatible Replacement Ceramic tap cartridge to fit the Lamona Cubic single lever tap. TAP9106,TAP9101,TAP9102,


If your tap is dripping or leaking out of the spout then it is time to replace / change the cartridge.
Original spare part code 1202R.Compatible with model TAP9101, TAP9106.

If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout.
When you replace the new rubber seals they need greasing with a silicone grease.
Our spout repair kit is compatible with the 3527R.

How to remove the tap handle and replace the valve:
Unscrew the handle stem and loosen the grub screw using a 3mm Allen key.
Now pull the handle body horizontally away from the body and unscrew the valve cover.
With the cover is removed hold the body of the tap firmly and use an adjustable spanner unscrew the valve lock nut.
Unscrew the handle stop then pull the old valve cartridge away from the tap.
How to remove the spout and replace the orings?
Loosen grub screw on the rear of body using a 2.5mm allen key.
Pull the spout vertically away from the body and remove orings.

You can find the Cubic tap diagram / instructions below.

Frequently asked questions about your Lamona Cubic tap.

How to identify my Lamona tap? How to repair my leaking Lamona Cubic tap? Spares available for Lamona Cubic.
Any further questions contact our experienced technical team.