RANGEMASTER AUQATREND SINGLE LEVER TAP SPARES
Tap Magician Compatible spare to fit the Rangemaster Aquatrend TRE1SLCM single lever Kitchen Mixer tap.

If your tap is dripping or leaking out of the spout then it is time to replace / change the cartridge.
Original spare part known by code 1202R / 1484R / ASSLC0001.

If your tap is leaking where the spout joins the tap body then it is time to replace the spout seals.
You need to replace all the O rings on the spout and silicone lubricant should be applied.
Original O-Ring kit know by spare part code 1260R.

If you require a new antisplasher this is our part SK22X (available in Chrome).
Original spare part known by 1485R.
Your original part may have Neoperl stamped around the edge.

How to remove the Rangemaster Aquatrend tap handle and replace the valve:
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, using appropriate size Allen key (SK01-S).
Step 2. Pull the handle away from the tap body.
Step 3. Unscrew decorative shroud from the tap body anticlockwise.
Step 4. Use an adjustable spanner to undo the cartridge locking nut.
Step 5. Remove old cartridge from the tap body.
Step 6. Fit your new cartridge in place and reverse the steps to refit the handle.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.