Compatible Spare Parts for the Franke Triflow Trend Lever

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Trend-LeverQ2-CWAClockwise with 21 teeth adaptor1/2" x 20 x 54mm NTC£12.99 Tomorrow
Trend-LeverQ2-AWAAnticlockwise with 21 teeth adaptor 1/2" x 20 x 54mm NTC£12.99 Tomorrow
Trend-LeverQ2-PWAPair with 21 teeth adaptors1/2" x 20 x 54mm NTC£21.50 Tomorrow
Trend-LeverQ2-3WATriflow pack with 21 teeth adaptor1/2" x 20 x 54mm NTC£34.49 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR24C-SSingleAerator chrome£6.00 Tomorrow
SK94-SSingleSpout O'Ring Repair Kit£5.00 Tomorrow
SL05-SSingleLubricant£3.50 Tomorrow
ST17-SSingle17mm spanner£6.50 Tomorrow
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tomorrow


FRANKE TRIFLOW TREND 1 LEVER TAP SPARES
Compatible replacement cartridges for the Franke Triflow Trend 1 Lever Kitchen Mixer tap.


For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Known by spare parts FR9245 Hot and FR9246 Cold and Filter Valve.
Hot, cold and filter valves replacements available with 21 adaptor. Original cartridge has a 21 spline nylon handle adaptor.

You will need a clockwise for the hot side and anticlockwise for the cold and filter water.
If you would like to replace all 3 please select our Triflow pack option.

Replacement Aerator available compatible with FR9405

Frequently asked questions about your Franke Triflow Trend Lever tap.

How do I remove the Trend 1 Lever tap lever / handle?

First you will need to turn off the water supply to the tap.
Pull off the lever handle assembly. A firm pull will be required.

How to replace your cartridge?
Use 17mm spanner to undo cartridge anticlockwise.
Some water will seep out, keep a cloth handy.
You will need to remove the Nylon clip on the Trend 1 Lever model.

**Please note you will need to reuse your nylon clip on the replacement cartridge.

You can find the tap lever removal diagram / instructions below.
How do I remove the tap spout and replace the o-rings?
Use a Allen key to undo grub screw holding spout in place. Pull spout up and out of tap body.

Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.