PERRIN & ROWE ORBIQ TAP SPARES
Replacement tap cartridges to suit the Perrin-And-Rowe Orbiq tap 4212, 4214, 4312 and 4314 models.

Watch our How to video for guidance on general removing tap handles and replacing tap cartridges.


We can supply the spline adaptor but not the circlip. However you can easily reuse your old parts.
This Tap takes 2 valves (1 Hot FR9762 and 1 Cold FR9763).

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part code 9.13145 and 9.13146

Cartridge comes with white plastic spline adaptor. Your old adaptor may come out on the cartridge or remain in the handle.

If your tap is leaking from the neck / spout then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.

You can find the tap diagram below /instructions.
How To remove the handle and replace the cartridge:
1. Pull the lever off. A firm pull will be required outwards and upwards.
2. Use 17mm Spanner to undo cartridge (anticlockwise).
3. Remove white clip from around the body of the old cartridge. We do not supply this part and must be re-used.
4. If spline adaptor has remained in the handle this will need to be removed from inside the handle.
5. Fit new cartridge (Screw in to tap body clockwise) and fully tighten with spanner.