Compatible Spare Parts for the Franke Triflow_Olympus

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Triflow_OlympusQ2-CWAClockwise with 21 teeth adaptor1/2" x 20 x 54mm NTC£11.98 Tomorrow
Triflow_OlympusQ2-AWAAnticlockwise with 21 teeth adaptor 1/2" x 20 x 54mm NTC£11.98 Tomorrow
Triflow_OlympusQ2-PWAPair with 21 teeth adaptors1/2" x 20 x 54mm NTC£22.47 Tomorrow
Triflow_OlympusQ2-3WATriflow pack with 21 teeth adaptor1/2" x 20 x 54mm NTC£29.96 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK94-SSingleFranke Tap Repair Kit£6.49 Tomorrow
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Tomorrow
SL50-SSingleRegin Grease 50ml£9.99 Tomorrow
ST17-SSingle17mm spanner£6.50 Tomorrow


Tap Magician Replacement Cartridges to fit the Franke Triflow Olympus Tap.

We can supply the spline adaptor but not the circlip. However you can easily reuse your old parts.
This Tap takes 3 valves (1 Hot FR9762 and 1 Cold FR9763 and 1 Filtered Cold FR9764).

Tap Magician compatible spares / parts to repair the Franke Triflow Olympus Filter Kitchen mixer tap.

The Franke Triflow Olympus was discontinued Spring 2011.

***Please note this cartridge will NOT fit the Franke FILTERFLOW Olympus. The Filterflow Valve can be found by clicking here

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. This Franke Triflow Olympus Tap takes 3 valves. The Cold and Filter require our Anticlockwise opening valves. Hot requires Clockwise open. (Hot FR9762 and Cold/Filter FR9763)

Cartridge comes with white plastic spline adaptor. Your old adaptor may come out on the cartridge or remain in the handle.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by FR9400

You can find the Triflow tap diagram below /instructions
How To remove the handle and replace the cartridge: 1. Pull the lever off. A firm pull will be required outwards and upwards.
2. Use 17mm Spanner to undo cartridge (anticlockwise)
3. Remove white clip from around the body of the old cartridge. We do not supply this part and must be re-used.
4. If spline adaptor has remained in the handle this will need to be removed from inside hte handle. The New cartridge comes complete with spline adpator. 5. Fit new cartridge (Screw in to tap body clockwise) and fully tighten with spanner.


Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.