Main product categories
FREE DELIVERY
OVER £100.00
SAME DAY DISPATCH
MONDAY-FRIDAY BEFORE 3PM
NEXT DAY DELIVERY
AVAILABLE
Whatsapp Instagram Facebook Youtube

Compatible Spare Parts for the Abode Melford

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
MelfordQA-ABAnticlockwise (to open) blue1/2" Cartridge 20 x 51mm £10.99 Tomorrow
MelfordQA-CRClockwise (to open) red1/2" Cartridge 20 x 51mm £10.99 Tomorrow
MelfordQA-PPair (1 x red, 1 x blue)1/2" Cartridge 20 x 51mm £21.98 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK15-SSingleSpout O' Ring Kit£3.99 Tomorrow
SL05-SSingleLubricant£3.60 Tomorrow
ST04-SSingleTap Handle Puller£17.99 Tomorrow
ST17-SSingle17mm spanner£6.50 Tomorrow
STBOX-SSingleCartridge Box Spanner 14mm 17mm£10.50 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Set£10.50 Tomorrow
Q152HW-PH10Pair 1/4 Turn Cartridges + handle & shroud1/2" x 20 x 52mm wide spline£29.99 Tomorrow

ABODE MELFORD MONOBLOC TAP SPARES
Tap Magician Replacement tap cartridges to fit the Abode Melford Monobloc AT1041 AT1044 AT1043 Monobloc tap.

If your Melford tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3984R / SP3984 / ASSCDV0001, hot and cold valve replacements available.

Cartridge has 20 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

If you need new crosshead handles for your Melford tap you can purchase our tap reviver which is new cartridges as well as handles.

If your tap is leaking from the neck (where the spout meets and joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a suitable silicone grease.
Our SK15-S is compatible with the original codes known by 3646R.

You can find the Melford tap diagram/instructions below.
How To remove the handle:
Unscrew the hot cold indices/screw cover cap from the top of the handle, Unscrew the screw using a crosshead or slotted screwdriver and pull the handle vertically away from the tap.

Watch our help video below for general guidance on removing handles and replacing your Quarter turn ceramic valves.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.