HOME BASE MARCO POLO SPARES
Tap Magician compatible spare parts to repair the Marco Polo Dual Handle Monobloc Tap Chrome with cross head handles.

For guidance / instructions of how to replace a tap valve step by step please click here

If your marco polo tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 1212R. Hot and cold replacement valves available.

If your tap is leaking from round the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
You need to replace all parts from the O'Ring seal kit The original Oring kit is known by 1239R.
You should apply silicone grease to the o rings before replacing the spout.

Cartridges have 20 teeth on spline compatible with model 368578.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair"

Replacement aerator insert compatible with 1317R (insert only)

If you need new cross head handles / tap tops for your Homebase Marco Polo crosshead mixer tap you can purchase our tap reviver kit.
This kit comes complete with replacement cartridges, handles and shrouds to completely revive and repair your tap.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.
Frequently asked questions about your Homebase Marco Polo tap

How to remove my Marco Polo tap head/handle?
Remove end cap/hot cold indice. This will reveal a screw. Use crosshead screwdriver to undo screw. Pull handle off. Unscrew shroud.

How to remove the Spout?
Unscrew locking nut at base of spout. Pull spout up and out of tap body.



How to identify my homebase tap? How to repair my leaking Homebase tap? Spares.. Any further questions contact our experienced technical team