JOHN LEWIS GLIDE TAP SPARES

Replacement ceramic disc tap cartridges to fit the John Lewis Glide Kitchen tap.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Original spare part codes for the cartridges 1212R.
Cartridge has 20 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease.

If you have a leak at the base of the spout you need to replace the spout o rings. If this doesn't resolve the leak or you need a new spout we have a compatible swan neck spout available in chrome (SPOUT01C) and silksteel (SPOUUT01CB).

If you require a new antisplasher / aerator this is our part SR80C (chrome) and SR80CB (silksteel).

How do I remove the tap handle on my John Lewis Glide kitchen mixer tap and replace the cartridge?
1. Remove indice from end of handle.
2. Use crosshead screwdriver to undo screw holding handle on.
3. Pull lever handle off.
4. Unscrew shroud anti-clockwise.
5. Use 17mm or adjustable spanner to undo cartridge. It will unscrew anticlockwise.

How do I remove the spout and replace the o rings?
1. Unscrew spout locking collar.
2. Pull Spout up and away from tap body.
3. Replace O rings and split washer
4. Grease new o rings.
5. Replace spout and tighten locking collar.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.