RANGEMASTER AQUACLASSIC 3 TAC 3 KITCHEN TAP SPARES

Tap Magician Compatible Replacement spare parts for the Post 2004 Rangemaster Leisure Aquaclassic 3 TAC3 tap.
If your tap is dripping or leaking out of the spout then it is time to replace / change the valve.
Original spare part code is 1212R / 3984R (2004 onwards).

Cartridge has 20 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
Replacement spout repair kit code SK19-S.

Replacement Antisplasher aerator / flow restrictor available as SR63C-S (chrome) and SR63CB-S (brushed chrome).

You can find the 3 TAC3 tap / instruction diagram below.
How do I remove the handle and replace the internal cartridge on the TAC3 tap?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw from underside of handle, by using a allen key.
Step 2. Pull the handle away from the tap body.
Step 3. Unscrew decorative shroud from the tap body anticlockwise.
Step 4. Use an adjustable spanner to undo the cartridge locking nut.
Step 5. Remove old cartridge from the tap body.
Step 6. Fit your new cartridge in place and reverse the steps to refit the handle.

How do I remove the spout and replace the o'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place. pull spout up and out of the tap body.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.