RANGEMASTER LEISUREAQUADISC 3 TAD3 KITCHEN TAP SPARES
Tap Magician compatible replacement Cartridges to fit the Rangemaster leisure Aquadisc 3 TAD3 kitchen mixer tap.
If your Rangemaster Aquadisc tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Cartridge has 20 teeth on spline. Hot and cold valves available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side,
If you require both then you can select "Pair".
When you remove your cartridge (Original cartridge coding 1212R) it may come out stuck inside the brass bush.
If you cannot separate the bush from the cartridge then you will need to purchase both the cartridge and bush.
If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease. O-rings known by kit code 1239R.
If you need a new complete spout this is our code SPOUT01C and comes complete with aerator and o rings.
Please note our spout is a tall swan neck style spout.
Replacement tap aerator / antisplasher available. SR24C-C (Chrome).
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.
How to remove the Aquadisc 3 TAD3 Tap handle?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, by using a 2.5mm allen key.
Step 2. Pull the handle away from the tap body.
Step 3.Use a spanner to unscrew the cartridge.
Step 4. Replace the cartridge and reverse the steps to refit the handle.
May be known by RMTAD1846, RMTAD1847