SAN MARCO BOSTON KITCHEN TAP SPARES

Replacement spare parts to fit the San Marco Boston kitchen tap.
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 1212R.

Boston cartridge has 20 teeth on spline. Hot and cold valve replacements available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap cartridge comes out stuck inside the bush, you can try to separate it and re-use the old bush.
If you cannot separate then you will need to purchase a new bush (SB34-S).

If your Boston tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R.

Frequently asked questions about your Abode Antila tap.

How to remove my San Marco Boston tap head / handle?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove tap indice screw cap cover. This will prise off.
Step 2. Remove the handle retaining screw with crosshead screwdriver.
Step 3. Pull handle away from tap body.
Step 4. Unscrew decorative tap shroud. This will unscrew anticlockwise.
Step 5. Use a spanner to remove the tap cartridge.

How to remove my San Marco Boston Spout?
Step 1. Unscrew the spout locking collar at the base of the spout anticlockwise.
Step 2. Pull spout up and out of tap body.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.
How to identify my San Marco tap? How to repair and fix my leaking San Marco tap? San Marco compatible spares available.