Compatible Spare Parts for the Bristan Monza

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
MonzaQA-ABAnticlockwise (to open) blue1/2" x 20 x 51mm £9.99 Tomorrow
MonzaQA-CRClockwise (to open) red1/2" x 20 x 51mm £9.99 Tomorrow
MonzaQA-PPair (1 x red, 1 x blue)1/2" x 20 x 51mm £19.98 Tomorrow
MonzaQA-PWNPair with 34mm bush1/2" x 20 x 51mm £39.96 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR63C-SSingleAerator chrome£6.99 Tomorrow
SR63CB-SSingleAerator brushed chrome£6.99 Tomorrow
SI01-SSingleTap indices set£6.99 Tomorrow
SK22-SSingleO' Ring Tap Repair Kit£5.00 Tomorrow
SB34-SSingle34mm TO 1/2" BSP Conversion bush£7.94 Tomorrow
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Tomorrow
SL50-SSingleRegin Grease 50ml£9.99 Tomorrow
ST17-SSingle17mm spanner£6.50 Tomorrow

Replacement spare parts to fit the Bristan Monza easyfit kitchen mixer monobloc tap.

The valves fitted into the Monza tap have changed in manufacturing over the years so you will need to remove your tap handle to check you are purchasing the correct version. This is the 20 spline version x 52mm tall. (known by Bristan part code 1212R. If you need the 28 spline (3602R) then please click here

Blue red tap indices / end screw caps also available (sold as a pair) They are chrome (plastic)

If your tap is leaking from where the spout joins the base of the tap (the neck) then you need to replace the spout o rings original code 1239R (our code SK22-S)

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

Tap valves can be called inserts, glands, ceramic disc valve.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.