CDA TC56 SPARES
Watch our tutorial on how to remove the handle and replace the cartridges.

Tap Magician compatible spares / parts to repair the CDA TC56 CH Kitchen monobloc chrome pull out tap.

(Original cartridges known by code 1212R)
Please note the Manufacturers changed the internal cartridge design in 2013 from 1212R threaded collar cartridge to 3819R to non threaded collar.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

If your tap is leaking from round the neck (where the spout joins the tap body) then the seals inside the spout need replacing. You need to replace all parts from the O'Ring seal kit The original Oring kit is known by 1315R. You should apply silicone grease to the o rings before replacing the spout.

Cartridge has 20 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

If your cartridge comes out attached to the bush then you need to try to separate this. If you cant separate the bush you will have to purchase a new bush (SB34-S)

If you need a new aerator/antisplasher this is SR63C-S.

We now supply a compatible lever handle this is plain (not marked H/C)

Frequently asked questions about your TC56 tap.

How to remove my TC56 tap head/handle?
Remove end indices from handle (indices available if these get damaged) Use crosshead screwdriver to undo screw. Pull handle off

How to remove the Spout?
Use 2.5mm allen key to undo screw at the back of the spout. Pull spout up and out of tap body.

Watch our How to video for guidance on removing tap handles and replacing tap cartridges.