Compatible Spare Parts for the Carron Phoenix Enya

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
EnyaQA-ABAnticlockwise (to open) blue1/2" x 20 x 51mm £9.99 Today
EnyaQA-CRClockwise (to open) red1/2" x 20 x 51mm £9.99 Today
EnyaQA-PPair (1 x red, 1 x blue)1/2" x 20 x 51mm £19.98 Today
EnyaQA-PWNPair with 34mm bush1/2" x 20 x 51mm £39.96 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SI01-SSingleTap indices set£6.99 Today
SK22-SSingleO' Ring Tap Repair Kit£5.00 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
SB34-SSingle34mm TO 1/2" BSP Conversion bush£7.99 Today
ST17-SSingle17mm spanner£6.50 Today


CARRON PHOENIX ENYA TAP SPARES
Replacement spare parts compatible with the Carron Phoenix Enya tap.


Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 1212R / 3984R, hot and cold valve replacements available.

The cartridge has 20 splines. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

When you remove your old valve from the tap the bush sometimes this remains inside the tap block, sometimes it comes out together with the valve.
If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush. (Bush is our code SB34, original code 3408R).

If your tap is leaking around the base of the spout (the neck) you need to replace the o rings inside the spout.
Our O'rings are compatible with original spare parts known by 1239R.

How do I remove the Enya tap handle/head?

Remove handle indicator / indice by prising it off. You can then remove the handle retaining screw with a crosshead screwdriver.
Once removed pull the handle away from the tap body.

How do I remove the spout?

Unscrew locking collar at base of spout and pull spout up and out of tap body.
We recommend to apply grease on the new o rings.

What tools will I need to replace the tap cartridge?

You will need an adjustable (or 17mm) spanner, and a crosshead screwdriver.

How do I know which side is leaking?

If you have isolation valves under the sink you can isolate the supply to work out which is leaking.
Otherwise you should replace both the hot and cold at the same time.

Tap valves known by tap glands, inserts, 1/4 turn ceramic disc valve, internals, tap spares.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.