Compatible Spare Parts for the Clearwater Logan

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
LoganQA-ABAnticlockwise (to open) blue1/2" Cartridge 20 x 51mm £9.99 Tuesday
LoganQA-CRClockwise (to open) red1/2" Cartridge 20 x 51mm £9.99 Tuesday
LoganQA-PPair (1 x red, 1 x blue)1/2" Cartridge 20 x 51mm £19.98 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SB27-SSingle27mm adaptor bush£7.94 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
ST17-SSingle17mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday

CLEARWATER LOGAN TAP SPARES
Tap Magician replacement parts for the Clearwater Logan crosshead kitchen mixer tap.


If your tap is leaking/dripping out of the spout then it is time to replace the cartridges.
Our cartridge is compatible with the original 1212R coded cartridge.

When you remove your old valve from the tap the bush usually remains inside the tap block however,
sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them.
If you are unable to separate the valve from the bush then you will need to purchase a replacement.
Replacement bush is available as a twin pack with cartridge or singly as code SB27, original code 3868R.

The Clearwater Logan cartridge has 20 splines. Hot and cold cartridges available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side,
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.

Watch our video below for guidance / how to change your quarter turn ceramic valves.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.