CLEARWATER REGENT TAP SPARES

Tap Magician replacement parts for the Clearwater Regent kitchen twin lever mixer tap KT-1208 OP-179921 OP-179920 .
Watch our video below for guidance / how to change your quarter turn ceramic valves and Spout O'Rings.

Please note the internal cartridges have changed over the years. This is the earlier version with 20 teeth on the spline.
There is no way to identify from the tap itself which cartridge you need, you will need to count the teeth on the spline.
If you need the later 28 spline cartridge please clickhere

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 1212R. Hot and cold valve replacements available.

Compatible replacement chrome swan neck spout available. Compatible with 1306R (aerator is different on our spout)

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair"

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R.

Replacement aerator insert compatible with 1317R (insert only)

How to remove the handle:
Loosen grub screw on the underside of handle using a 2mm allen key (SK01-S).
Once this is undone the handle will pull off. Replacement handle grub screw available SS81-S.

How to replace the spout O'Rings:
Whilst holding body unscrew the spout locking collar then pull the spout vertically away from the body.

Clearwater Regent tap instructions diagram below.

Cartridges can be known by glands, inserts, ceramic disk valve.