Compatible Spare Parts for the Cooke And Lewis Blyth Basin

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Blyth-BasinQ4-CRClockwise (to open) red1/2" Cartridge 20 x 52mm NTC£9.99 Today
Blyth-BasinQ4-ABAnticlockwise (to open) blue1/2" Cartridge 20 x 52mm NTC£9.99 Today
Blyth-BasinQ4-PPair (1 x red, 1 x blue)1/2" Cartridge 20 x 52mm NTC£19.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SA44-SSingle10mm adaptor x 32 teeth£3.50 Today
SL05-SSingleLubricant£3.50 Today
ST14-SSingle14mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today


Tap Magician compatible spares / parts to repair the Cooke & Lewis Good Home Blyth basin pillar tap spares.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Hot and cold valves available.

Cartridge has 20 splines and is quarter turn.
You will require anticlockwise for the cold and clockwise for the hot.
Replacement handle adaptor available (SA44-S).

How to remove the handle?
Remove red hot / blue cold indice from handle.
Use crosshead screwdriver to undo screw.
Pull the lever off. You can then remove the tap valve using a spanner.

How do I replace the tap cartridge?
First you will need to isolate the water.
Use an adjustable spanner to undo cartridge (it will unscrew anticlockwise).
Fit new cartridge and replace the tap handle.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

How to identify my Cooke and Lewis tap? How to repair my leaking tap?

If you need any help of advice please contact our technical advisors.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.