Compatible Spare Parts for the CDA TC56

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TC56Q4-CRClockwise (to open) red1/2" Cartridge 20 x 52mm NTC£11.99 Tuesday
TC56Q4-ABAnticlockwise (to open) blue1/2" Cartridge 20 x 52mm NTC£11.99 Tuesday
TC56Q4-PPair (1 x red, 1 x blue)1/2" Cartridge 20 x 52mm NTC£23.98 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR22X-SSingleAerator chrome F22x1 12 L/Min£6.99 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
ST14-SSingle14mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
SK1315-SSingleSpout O Ring Kit £6.50 Tuesday
SK01-SSingleSet of Allan Keys£1.99 Tuesday
SI01-SSingleTap indices set£5.50 Tuesday
SS04-SSingleM5 handle grub screw£3.00 Tuesday

CDA TC56 Spares
Tap Magician compatible spares / parts to repair the CDA TC56 Kitchen monobloc chrome tap.

(Original cartridges known by code 3819R)
Please note the Manufacturers changed the internal cartridge design in 2013 from 1212R threaded collar cartridge to 3819R to non threaded collar. This is version without collar

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

If your tap is leaking from round the neck (where the spout joins the tap body) then the seals inside the spout need replacing. You need to replace all parts from the O'Ring seal kit The original Oring kit is known by 1315R. You should apply silicone grease to the o rings before replacing the spout.

Cartridge has 20 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

If you need a new aerator/antisplasher this is SR22X-S.(known by 1485R)

Frequently asked questions about your TC56 tap.

How to remove my TC56 tap head/handle?

Remove end indices from handle (indices available if these get damaged) Use crosshead screwdriver to undo screw. Pull handle off

How to remove the Spout?
Use 2.5mm allen key to undo screw at the back of the spout. Pull spout up and out of tap body.If you need a new spout screw you can purchase SS04-S

Watch our How to video for guidance on removing tap handles and replacing tap cartridges.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.