Compatible Spare Parts for the Carron Phoenix Aztec

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
AztecQ4-CRClockwise (to open) red1/2" x 20 x 52mm NTC£11.99 Today
AztecQ4-ABAnticlockwise (to open) blue1/2" x 20 x 52mm NTC£11.99 Today
AztecQ4-PPair (1 x red, 1 x blue)1/2" x 20 x 52mm NTC£23.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK22-SSingleO' Ring Tap Repair Kit£5.00 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
SI01-SSingleTap indices set£6.99 Today
SB34-SSingle34mm TO 1/2" BSP Conversion bush£7.99 Today
SB28-SSingle28mm to 1/2" BSP£9.99 Today
ST17-SSingle17mm spanner£6.50 Today


CARRON PHOENIX AZTEC TAP SPARES
Replacement Spare parts compatible with the Carron Phoenix Aztec Kitchen Mixer tap.


***The cartridge fitted into this tap has changed over the years. You need to count the splines on your cartridge to ensure you purchase the correct one.
This cartridge is the 20 spline version that will replace 1212R or 3819R.

If you need the 18 spline cartridge please clickhere.

If your Tap is leaking at the joint of the body of the tap and the spout then you might need to replace your O-rings.
Our SK22 is the current O Ring Kit used in this tap but there is no guarantee that it will suit far older models.
This kit replaces the O Ring kit 1239R.

If your cartridge comes out stuck inside the brass bush/ring and you cannot separate it then you will need to purchase a new bush as well as the cartridge.
There are two versions of bush as this has changed on the later 20 spline cartridge, 28mm thread and 34mm thread.

Watch our YouTube video below for a step by step tutorial how to replace the tap cartridges.


Carron Phoenix Aztec FAQ
How do I remove the Carron Phoenix Aztec Tap Handle/ Head?

Step 1. Remove hot / cold indices from the end of the handles. Step 2. Use Crosshead screwdriver to undo screw holding handle in place. Step 3. Pull tap handle off. You may need to use some force. Step 4. Use adjustable or 17mm spanner to undo cartridge anticlockwise.

How do I remove the spout and replace the o rings?
Step 1. Unscrew locking collar at the base of the spout. Once unscrewed the spout will pull up and out of the tap body. Replace the O rings applying silicone grease to the new o'rings before refitting.

What will stop my Carron Phoenix Aztec tap dripping?
If your tap is dripping out of the spout then you need to replace the ceramic cartridges. If you have isolation valves under the sink you can work out which side (hot or cold) is dripping. Otherwise its best to replace both at the same time.

Tap Valves can be known by glands, inserts, ceramic disc cartridge, 1/4 turn cartridge,

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.