Compatible Spare Parts for the Clearwater Stella

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
StellaQ4-CRClockwise (to open) red1/2" x 20 x 52mm NTC£12.99 Today
StellaQ4-ABAnticlockwise (to open) blue1/2" x 20 x 52mm NTC£12.99 Today
StellaQ4-PPair (1 x red, 1 x blue)1/2" x 20 x 52mm NTC£25.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK30-SSingleO' Ring Tap Repair Kit£5.00 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
SL50-SSingleRegin Grease 50ml£9.99 Today
ST14-SSingle14mm spanner£6.50 Today
SK01-SSingleSet of Allan Keys£1.99 Today
SS04-SSingleM5 handle grub screw£3.00 Today


Tap Magician replacement Tap Magician replacement spares for the Clearwater Stella 3 way kitchen mixer filter tap. **** Unfortunately we can only supply the hot and the cold. We cannot supply the front filter water tap cartridge.

**Cartridges may come out with bushes attached to them. See image below. You will need to remove the bushes and re use these on the new cartridge. We cannot supply the bushes.

For guidance / instructions of how to replace a tap valve step by step please click here

Cartridge has 20 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

How To remove the handle: Use a 2.5mm Allen key to remove grub screw on the underside of the handle. The handle will then pull off and the shroud / chrome cover will unscrew.

SCREW: SS04 is suitable for handle and spout.

If your tap is leaking where the spout joins the base of the tap then you need to replace the o'rings inside the swiveling spout. There are 4 black O'rings which need to be replaced.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.