RANGEMASTER AQUADISC 2 TAD 2 (TAD2) TAP SPARES
Tap Magician compatible spares / parts to repair the rangemaster aquadisc Kitchen mixer tap.
This is the later cartridge without a threaded collar.
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 1212R/ ASSCDV0001.
Cartridge has 20 teeth on spline. Hot and cold valve replacements available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".
When you remove your cartridge it may come out stuck inside the brass bush. If you cannot separate the bush from the cartridge then you will need to purchase both the cartridge and bush.
If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R
If you need a replacement aerator this is our SRBLK-S, which is compatible with 133.0068.760 / 1256R
Frequently asked questions about your rangemaster Aquadisc 2TAD tap.
How to remove my 2 TAD tap head / handle?
Remove indice (replacement indices available). Use crosshead screwdriver to undo screw.
The handle will then pull off.
How to remove the Spout?
Unscrew locking nut at the base of the spout. Pull spout up and out of tap body.
How to replace your cartridge?
First turn water off. Using a 17mm spanner to undo cartridge anticlockwise.
Some water will seep out, keep a cloth handy.
Fit new cartridge clockwise, tighten with spanner.
Any further questions contact our experienced technical team.