Compatible Spare Parts for the San Marco Genoa

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
GenoaQ4-CRClockwise (to open) red1/2" Cartridge 20 x 52mm NTC£11.75 Tuesday
GenoaQ4-ABAnticlockwise (to open) blue1/2" Cartridge 20 x 52mm NTC£11.75 Tuesday
GenoaQ4-PPair (1 x red, 1 x blue)1/2" Cartridge 20 x 52mm NTC£23.50 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SRBLK-SSingleMale Thread 24mm Black£4.40 Tuesday
SK22-SSingleSpout O ring repair kit£5.00 Tuesday
SB34-SSingle34mm TO 1/2" BSP Conversion bush£7.99 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
SI01-SSingleTap indices set£5.50 Tuesday
SF12P-SSingleTap Fixing Kit£5.99 Tuesday


Tap Magician compatible spares / parts to repair the San Marco Genoa Kitchen mixer monobloc tap.

Watch our how to video for further guidance on removing your tap handles and replacing tap cartridges.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 3819R.

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

Your valve may come out stuck inside the brass bush (original code SP3408 / 3408R / 133.0069.391)./ If you cannot separate or the tap is leaking at the handle joint you will need to purchase together with the new bush.

If your Genoa tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1239R SP1239.

If you need a replacement aerator this is our SRBLK-S, which is compatible with 133.0068.760 / 1256R

How To remove the handle: First remove screw cover (indice) on the end of the handle. Use appropriate screwdriver to remove screw holding handle in place. The handle will then pull off. Replacement indices available.

How to remove the spout: Unscrew locking collar at base of spout. Pull spout up and out of tap body. Grease the new o rings before fitting back in to spout.
Tap fixing kit SF12P (replaces 1242R SC006020)

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.