Compatible Spare Parts for the Bristan Blade Basin

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
B-BladeQ4-CRClockwise (to open) red1/2" Cartridge x 20 x 51mm NTC£9.99 Tomorrow
B-BladeQ4-ABAnticlockwise (to open) blue1/2" Cartridge x 20 x 51mm NTC£9.99 Tomorrow
B-BladeQ4-PPair (1 x red, 1 x blue)1/2" Cartridge x 20 x 51mm NTC£19.98 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ST14-SSingle14mm spanner£6.50 Tomorrow
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tomorrow

Replacement BSP ½ ceramic cartridges compatible with the Bristan Blade Basin taps BL 1/2 C - BL1/2C.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Hot and cold replacements available.

Cartridge has 20 teeth on spline.
Your handle will utilise a blue nylon adaptor. Replacement available (SA04).

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

Frequently asked questions about the Bristan Blade tap.

How to remove my Bristan Blade handle?
Firstly isolate the water supply. Prise out the lever cap and loosen the grub screw.
Pull handle off and remove the valve.

How to identify my Bristan tap? How to repair my leaking Bristan Blade tap? Spares available for Bristan Blade.

Watch our How to video for guidance on removing tap handles and replacing tap cartridges.

If you need any help of advice please contact our technical advisors.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.