Bristan Quest-High-Pillar Spare Parts Quest-High-PillarQ4 747F135203 1

FREE DELIVERY
OVER £100.00

SAME DAY DISPATCH
MONDAY-FRIDAY BEFORE 3PM

NEXT DAY DELIVERY
AVAILABLE

Compatible Spare Parts for the Bristan Quest High Pillar

Please select from the available product options shown below

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
QuestHPQ4-CR	Clockwise (to open) red	1/2" Cartridge x 20 x 51mm NTC	£9.99		Monday
QuestHPQ4-AB	Anticlockwise (to open) blue	1/2" Cartridge x 20 x 51mm NTC	£9.99		Monday
QuestHPQ4-P	Pair (1 x red, 1 x blue)	1/2" Cartridge x 20 x 51mm NTC	£19.98		Monday

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
SA01BR-S	Single	Adaptor 20 Teeth x 15mm	£9.00		Monday
ST17-S	Single	17mm spanner	£6.50		Monday
STBOX-S	Single	Cartridge Removal Box	£9.99		Monday
ST0TTK-S	Single	Monobloc Tap Tightening Set	£10.50		Monday

BRISTAN QUEST HIGH PILLAR TAP SPARES
Replacement BSP ½ ceramic cartridges compatible with the Bristan Quest High Pillar Taps QST HNK C.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original cartridge may be known by VS02-C20 PAIR chrome and stamped with the code BS4512 CD XZ 20.

Cartridge has 20 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side,
If you require both then you can select "Pair".

The Quest handle is held on by a plastic spline adaptor. How to remove the handle:
The Handle will pull off. If this breaks you can re order a new one SA01BR.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.