Compatible Spare Parts for the Franke Anteleo

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
AnteleoT1-CRClockwise (to open) red1/2" Cartridge 28 x 47mm£14.99 Today
AnteleoT1-ABAnticlockwise (to open) blue1/2" Cartridge 28 x 47mm£14.99 Today
AnteleoT1-PPair (1 x red, 1 x blue)1/2" Cartridge 28 x 47mm£29.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SB28-SSingle28mm to 1/2" BSP£9.99 Today
SA03-SSingleHandle Adaptor & Screw £3.50 Today
SR63C-SSingleAerator chrome£6.60 Today
SK22-SSingleSpout O ring repair kit£5.00 Today
SL05-SSingleLubricant£3.50 Today
ST17-SSingle17mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today
SK01-SSingleSet of Allan Keys£1.99 Today


Replacement spare parts to fit the Franke Anteleo kitchen Mixer Monobloc tap 115.0433.948. Our Premium Quality cartridges are compatible with Franke spare part code SP3982 or 3540R 133.0358.079 / 133.0251.374 Hot valve SP3982-H 133.0358.080 / 133.0251.375 Cold valve SP3982-C

Your cartridge may come out with a bush attached to the cartridge and look like this. If it comes out attached you can try and separate it but corrosion can cause them to fuse together and be very difficult to separate. If this happens you need to purchase a new bush which is knwon by 3409R / 133.0069.390 (Our code for this is SB28-S)

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Cartridge has 28 splines. You need our anticlockwise for the cold side, and Clockwise for the hot side. If you choose the Pair option you will receive one of each.

Your handle will utilise a plastic spline adaptor. If you need a new adaptor you need to purchase this together with the cartridge This adaptor is known by 133.0251.372 or SP3807.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1239R / SP1239

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

You can find the Antelo tap diagram/instructions below.

FAQ

How do I stop a drip on my Franke Anteleo tap?
If the tap is dripping out of the end of the spout it will be either the hot or cold tap cartridge. If you have isolation valves under the sink you can identify which side is leaking. You cannot identify from the temperature of the drip.

How do I remove the Franke Anteleo tap handle?
There will be a grub screw on the underside of the handle. The handle will then pull off.

How do I stop a leak from the base of the spout?
If your tap is leaking where the spout joins the tap body (the neck) you need to replace the o'rings inside the spout

How do I remove the Anteleo tap spout?
Unscrew locking collar at base of tap spout. Pull tap spout up and away from tap body.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.