VICTORIAN PLUMING BOWER DUAL LEVER TAP SPARES

Tap Magician compatible spares cartridge to fit Victorian Plumbing Bower Dual Lever Traditional Kitchen Tap KIT001.
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Please note this model has changed the internal cartridge design. This is compatible with model code KIT001.

Bower Dual Lever cartridge has 32 teeth on spline. Hot and cold valve replacements available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

For guidance / instructions of how to replace a tap valve step by step please click here.

If your Bower Dual Lever tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.

Replacement antisplasher / aerator / perlator available in chrome (SR22X-S) and brushed (SR22XCB-S).

How to remove the Bower Dual Lever handle:
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, using appropriate size Allen key (SK01-S).
Step 2. Pull the handle away from the tap body.
Step 3. Unscrew shroud from the tap body anticlockwise.

Watch our video below for guidance / how to change your quarter turn ceramic valves.

Easily repair your Kitchen tap - Contact us for any technical support needed.