VICTORIAN PLUMING DUAL LEVER TRADITIONAL TAP SPARES

Tap Magician compatible spares cartridge to fit Victorian Plumbing Dual Lever Traditional tap KIT001.
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Please note this is version 2 of the KIT001 as the old KIT001 looked slightly different and takes different cartridges.
We advise that you check the tap photo carefully.

Traditional Dual Lever cartridge has 32 teeth on spline. Hot and cold valve replacements available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

For guidance / instructions of how to replace a tap valve step by step please click here.

If your Traditional Dual Lever tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.

Replacement antisplasher / aerator / perlator available in chrome (SR22X-S) and brushed (SR22XCB-S).

We have handles available - they need to be purchased together with new cartridges as a complete set as the splines on the valve are a different number.

How to remove the Traditional Dual Lever handle:
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, using appropriate size Allen key (SK01-S).
Step 2. Pull the handle away from the tap body.
Step 3. Unscrew shroud from the tap body anticlockwise.

Watch our video below for guidance / how to change your quarter turn ceramic valves.

Easily repair your Kitchen tap - Contact us for any technical support needed.