CLEARWATER ROCOCO TAP SPARES.

Tap Magician compatible spares for the Clearwater Rococo Monobloc Mixer Tap .
Compatible with models RO81062CP / 654FJ / RO81062BN / 187FJ / RO81062BV / 456FJ / RO81062AB / 591FJ.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Cartridge has 20 teeth on spline. Hot and cold cartridges available.

If you require both then you can select "Pair".

Please note when you remove the old valve from your tap, the bush usually remains inside the tap block.
However, it sometimes comes out attached to the valve.
If the valve is stuck inside the bush, you will need to separate them, as the bush must be reused with the replacement cartridge.

If you require a new antisplasher / aerator this is our part SR22X-S / SR22XCB-S / SR22B-S / SR22GL-S.
Your original part may have Neoperl stamped around the edge.

How to remove the Clearwater Rococo tap handle lever and replace the cartridge:
1. Remove chrome end cap from handle (the H and C indice)
2. Use crosshead screwdriver to undo handle retaining screw.
3. Once removed the handle can be pulled off.
4. Unscrew the shroud anticlockwise
5. Use 17mm or adjustable spanner to undo cartridge anticlockwise.
6. Replace new cartridge screwing in clockwise.