FRANKE TRIFLOW DORIC TAP SPARES
Tap Magician replacement ceramic cartridges to fit the Franke Triflow Doric tap.

Known by Franke spare part codes FR9145 FR9146.

Please be aware that the Triflow was discontinued in 2011 and was replaced by the Filterflow Doric.
This cartridge does not fit the filterflow tap, if you have the Filterflow version please click here

Watch our How to video for step by step guide to replacing the tap cartridges. They are easy to change yourself with just a 17mm or adjustable spanner.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
Hot, cold and filter valves replacements available with 21 adaptor.
You will need a clockwise for the hot side and anticlockwise for the cold and filter water.
If you would like to replace all 3 please select our Triflow pack option.

How do I remove the lever handle and replace the cartridge?
Step 1. Unscrew and remove the shroud that secures the handle.
Step 2. Pull off the complete lever handle assembly including the shroud.
Step 3. Use a 17mm or suitable adjustment spanner to remove the cartridge.



If your tap is leaking from the base of the spout where the spout meets the tap body (the neck) then you will need to replace the O Rings / washers inside the spout.
the original seal kit known by FR9400.
The new seals will need greasing once they have been fitted with suitable silicone grease.

We now have compatible lever handles available but these must be replaced together as a set with new cartridges as they differ from the originals and take a different cartridge.

How do I remove the tap spout and replace the o-rings?
Use a Allen key to undo grub screw holding spout in place. Pull spout up and out of tap body.

Watch our How to video for guidance on general removing tap handles and replacing tap cartridges.